Back to Category

H-Track Linear Actuators

  • Hydraulic drive delivers up to 4800 pounds (21350N) of force and travel speeds near 4 inches (100mm) per second.
  • The anodized aluminum alloy housing resists corrosion and provides protection from dirt, dust, humidity and many corrosives. See Compliance Matrix on page 18-19 of Catalog.
  • Temperature operating range of –20º F to +150º F (-26º C to +65º C).
    Standard –40º F to +130º F (-40º C to +54º C) and 0º F to +180º F (-18º C to +80º C) available.
  • Standard stroke lengths of 2, 4, 6, 8, 10, 12, 14 and 16 inches (51, 102, 152, 203, 254, 305, 356, 406 millimeters)
  • Consult factory for special or longer strokes
  • IP69K Dynamic
  • IP67 Static (Temporary Submersion)
  • Rod does not require torsional restraint

Data Sheet Warner H Track

If you're interested in this product or need any help and advice choosing the correct one for you, please call us on (01388) 778400.

Product Description

More Power in Less Space

The H1, H2 and H3 are the base models in the H-Track family. They incorporate a patented fluid power design which provides high load capability for extreme duty use, a more compact pin to pin than other actuators of the same load capability, excellent ingress protection and corrosion resistance.

The H-Track uses an external gear pump connected to a reservoir and actuator yielding the most impact resistant actuator offered by Warner Linear. The H-Track pump is burnished, cleaned, flushed and vacuum filled with degassed hydraulic fluid. The system is completely sealed with no hoses to leak. This ensures you receive contaminant free and maintenance-free product for the life of the actuator.


There are no reviews yet.

Be the first to review “H-Track Linear Actuators”

Your email address will not be published. Required fields are marked *